Custom Printed Feather Flags | Full Kit with Pole & Base
SKU
Complete feather flag kits, printed in full colour
A bold, portable way to mark your pitch, forecourt, site entrance or shop front. Feather flags are tall with a curved top edge and the largest print area of any flag shape, so they suit logos and longer messages. Suitable for indoor and outdoor use, and set up in under five minutes.
📏 Sizes — pole height and flag height
The size you select is the total assembled pole height, measured from the ground to the tip. The printed fabric is shorter, because the pole extends above the flag to let the curved tip arch over and hold the material under tension. Both figures are below.
| Size | Total pole height | Printed flag height | Flag width |
|---|---|---|---|
| Small | 2.5m | 1.9m | 0.55m |
| Medium | 3.4m | 2.6m | 0.6m |
| Large | 4.5m | 3.4m | 0.8m |
| Extra Large | 5.7m | 4.1m | 0.85m |
Measuring for a low ceiling or an overhead obstruction? Use the pole height, not the flag height.
✅ What's included in every kit
- Full-colour, photo-quality printed flag, double hemmed with a reinforced pole sock, loop and cords
- Slot-together flexi pole set, interchangeable across our feather flag range
- Purpose-made canvas zip carry bag with handles and pockets
- Free artwork layout, proofing and design service
Bases are selected separately — see the options below. On grass or soft ground a rotating ground spike is usually all you need. On hard standing you'll need a weighted or water-filled base.
🖨️ Single or double-sided print
Single-sided prints one face, with the design showing through in mirror on the reverse. Double-sided is printed on two separate layers with a block-out liner between, so both faces read the right way round. Choose double-sided where traffic or footfall approaches from both directions.
⚓ Choosing a base
- Rotating ground spike — grass and soft ground
- Cross base — indoor use and sheltered hard standing
- 25kg water base — outdoor hard standing, fill on site and empty for transport
- 30kg moulded tyre base — the most stable option for exposed hard standing
- Car roll-over base — sits under a vehicle wheel, ideal for forecourts and car parks
🔧 Specification
- Fabric: knitted polyester, printed by water-based dye sublimation with fade-resistant inks
- Pole: slot-together flexi pole set
- Setup time: under 5 minutes
- Care: machine washable, weatherproof print
- Manufacture: printed and made in the UK
- Wind: suited to normal outdoor conditions when correctly based and anchored. Take flags down in storms or sustained high winds.
🎨 Artwork
Free artwork layout and proofing on every order. Keep important text and logos within a 50mm safe area from the edge. We accept PDF, AI, EPS, PSD, JPEG and PNG — set up in CMYK, and supply images at 100ppi at 100% print size. Ask us for a template for your chosen size and shape.
🌱 Materials
Printed on recycled polyester using water-based sublimation inks. Fire-rated material and certification available on request for venues and events that require it.
Need help choosing? Tell us where the flag is going and we'll advise on size, shape and the right base.
Save 13%
Original price
£84.00
Original price
£84.00
-
Original price
£398.00
Original price
£84.00
Current price
£73.00
£73.00
-
£346.00
Current price
£73.00
